Cray

From Mpich
Revision as of 18:51, 9 May 2018 by Robl (talk | contribs) (Created page with "This page describes how to build mpich master from the [https://github.com/pmodels/mpich/ Github repository] == Cray build instructions == Building on the Cray is like other...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This page describes how to build mpich master from the Github repository

Cray build instructions

Building on the Cray is like other systems: you'll need fairly up-to-date Autotools (autoconf >= 2.67, automake >= 1.15, libtool >= 2.44). On Argonne's theta machine, you can find these in ~robl/soft/cray/autotools

configure options

Configure MPICH with these Cray specific options:

  • --with-device=ch4:ofi:gni for the Cray transport
  • --with-pmi=cray to pick up Cray PMI library from modules
  • --with-pm=no: Hydra won't work on the cray. Instead, aprun launches the processes.

Build notes

  • libfabric will use standard atomic types if detected, but the Intel compilers do not export all the types needed. You will need

https://github.com/ofiwg/libfabric/pull/3984/ until we update libfabric to something newer than 1.6.0

  • In fact, there are atomic types all over the place, and libfabric's gni provider doesn't have a fallback like the above general patch. For now load PrgEnv-gnu into your environment. That should bring in a fairly recent gcc (gcc-7.3 as of this writing)