Using the Hydra Process Manager
This wiki page only provides information on the external usage of Hydra. If you are looking for the internal workings of Hydra, you can find it here.
Hydra is a process management system for starting parallel jobs. Hydra is designed to natively work with multiple daemons such as ssh, rsh, pbs, slurm and sge.
All of the runtime options can be listed on the command line using the flag:
For further information about any specific flag, the information can be obtained by adding the option before the help flag:
mpiexec -<option> -help
Once built, the Hydra executables are in the bin subdirectory of the install directory if you have done an install. You should put this (bin) directory in your PATH in your .cshrc or .bashrc for usage convenience:
Put in .cshrc: setenv PATH /home/you/mpich/bin:$PATH Put in .bashrc: export PATH=/home/you/mpich/bin:$PATH
To compile your application use mpicc:
shell$ mpicc app.c -o app
Create a file with the names of the machines that you want to run your job on. This file may or may not include the local machine.
shell$ cat hosts donner foo shakey terra
To run your application on these nodes, use mpiexec:
shell$ mpiexec -f hosts -n 4 ./app
If the same application is run with 8 processes, it will use the hosts in a round robin manner. For instance, with the above host file, ranks 0 and 4 will execute on donner, ranks 1 and 5 on foo, ranks 2 and 6 on shakey and ranks 3 and 7 on terra.
The host file can also be specified as follows:
shell$ cat hosts donner:2 foo:2 shakey:2 terra:2
In this case, ranks 0-1 will execute on donner, ranks 2-3 on foo, ranks 4-5 on shakey and ranks 6-7 on terra.
A more complex host file layout can be:
shell$ cat hosts donner:2 foo:3 shakey:2
In this case, the first 2 processes are scheduled on "donner", the next 3 on "foo" and the last 2 on "shakey". Comments in the host file start with a "#" character.
shell$ cat hosts # This is a sample host file donner:2 # The first 2 procs are scheduled to run here foo:3 # The next 3 procs run on this host shakey:2 # The last 2 procs run on this host
By default, hydra passes inherits environment variables from the shell on which mpiexec is launched, and passes it to the launched processes. However, each launcher disables the automatic propagation of some environment variables. For example, the SSH launcher disables the propagation of "DISPLAY", the SLURM launcher disables the propagation of "SLURM_*" variables, etc.
Users can force an environment variable to be propagated using the -genv option.
Environment variables can also be used to control several settings in Hydra:
HYDRA_HOST_FILE: This variable points to the default host file to use, when the "-f" option is not provided to mpiexec.
For bash: export HYDRA_HOST_FILE=<path_to_host_file>/hosts For csh/tcsh: setenv HYDRA_HOST_FILE <path_to_host_file>/hosts
HYDRA_DEBUG: Setting this to "1" enables debug mode; set it to "0" to disable.
HYDRA_ENV: Setting this to "all" will pass all of the launching node's environment to the application processes. By default, if nothing is set, the launching node's environment is passed to the executables, as long as it does not overwrite any of the environment variables that have been preset by the remote shell.
HYDRA_LAUNCH_EXTRA_ARGS: The value of this environment variable is appended to the launcher. This can be used, for example, to pass the "-q" argument to the launcher by setting HYDRA_LAUNCH_EXTRA_ARGS=-q.
MPIEXEC_TIMEOUT: The value of this environment variable is the maximum number of seconds this job will be permitted to run. When time is up, the job is aborted.
MPIEXEC_PORT_RANGE: If this environment variable is defined then Hydra will restrict its usage of ports for connecting its various processes to ports in this range. If this variable is not assigned, but MPICH_PORT_RANGE is assigned, then it will use the range specified by MPICH_PORT_RANGE for its ports. Otherwise, it will use whatever ports are assigned to it by the system. Port ranges are given as a pair of integers separated by a colon.
HYDRA_PROXY_RETRY_COUNT: The value of this environment variable determines the number of retries a proxy does to establish a connection to the main server.
Hydra with Non-Ethernet Networks
There are two ways to use Hydra with TCP/IP over the non-default network.
The first way is using the -iface option to mpiexec to specify which network interface to use. For example, if your Myrinet network's IP emulation is configured on myri0, you can use:
shell$ mpiexec -f hostfile -iface myri0 -n 4 ./app1
Similarly, if your InfiniBand network's IP emulation is configured on ib0, you can use:
shell$ mpiexec -f hostfile -iface ib0 -n 4 ./app1
You can also control this using the HYDRA_IFACE environment variable.
The second way is to specify the appropriate IP addresses in your hostfile.
shell$ /sbin/ifconfig eth0 Link encap:Ethernet HWaddr 00:14:5E:57:C4:FA inet addr:126.96.36.199 Bcast:188.8.131.52 Mask:255.255.255.0 inet6 addr: fe80::214:5eff:fe57:c4fa/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:989925894 errors:0 dropped:7186 overruns:0 frame:0 TX packets:1480277023 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:441568994866 (411.2 GiB) TX bytes:1864173370054 (1.6 TiB) Interrupt:185 Memory:e2000000-e2012100 myri0 Link encap:Ethernet HWaddr 00:14:5E:57:C4:F8 inet addr:10.21.3.182 Bcast:10.21.255.255 Mask:255.255.0.0 inet6 addr: fe80::214:5eff:fe57:c4f8/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3068986439 errors:0 dropped:7841 overruns:0 frame:0 TX packets:2288060450 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3598751494497 (3.2 TiB) TX bytes:1744058613150 (1.5 TiB) Interrupt:185 Memory:e4000000-e4012100 ib0 Link encap:Ethernet HWaddr 00:14:5E:57:C4:F8 inet addr:184.108.40.206 Bcast:10.21.255.255 Mask:255.255.0.0 inet6 addr: fe80::214:5eff:fe57:c4f8/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3068986439 errors:0 dropped:7841 overruns:0 frame:0 TX packets:2288060450 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3598751494497 (3.2 TiB) TX bytes:1744058613150 (1.5 TiB) Interrupt:185 Memory:e4000000-e4012100
In the above case the 192.148.x.x IP series refers to the standard Ethernet (or Gigabit Ethernet) network, the 10.21.x.x series refers to Myrinet and the 10.31.x.x refers to InfiniBand.
shell$ cat hostfile-eth 220.127.116.11 18.104.22.168 22.214.171.124 126.96.36.199 shell$ cat hostfile-myri 10.21.3.180 10.21.3.181 10.21.3.182 10.21.3.183 shell$ cat hostfile-ib 10.31.3.180 10.31.3.181 10.31.3.182 10.31.3.183
To run over the Ethernet interface use:
shell$ mpiexec -f hostfile-eth -n 4 ./app1
To run over the Myrinet interface use:
shell$ mpiexec -f hostfile-myri -n 4 ./app1
Resource Managers and Launchers
Hydra natively interacts with a number of resource managers and launchers.
Resource managers provide information about the resources allocated by the user (e.g., slurm, pbs, loadleveler, lsf, sge, cobalt). Launchers allow mpiexec to launch processes on the system (e.g., ssh, rsh, fork, slurm, pbs, loadleveler, lsf, sge). Some tools act as both resource managers and launchers, while others play just one role.
In most cases, you don't need to do anything special for Hydra to work with your slurm, pbs, loadleveler, lsf, sge or cobalt environment. It'll automatically detect these resource managers and interact with them. The following command will be sufficient to launch processes on all the allocated cores:
shell$ mpiexec ./app
The above command will allow Hydra to inherit information about the resource manager and launcher available, resources allocated from the resource manager, and finally launch the appropriate number of processes.
However, if you do not want Hydra to auto-detect the launcher, you can customize it using the -launcher flag to mpiexec or the HYDRA_LAUNCHER environment variable.
shell$ mpiexec -launcher ssh -f hosts -n 4 ./app (or) shell$ mpiexec -launcher fork -f hosts -n 4 ./app
The executable to use as the launcher can also be customized using the option -launcher-exec or the HYDRA_LAUNCHER_EXEC environment variable:
$ mpiexec -launcher ssh -launcher-exec /usr/bin/ssh -f hosts -n 4 ./app
Similarly, if you do not want Hydra to auto-detect the resource manager, you can customize using the -rmk flag to mpiexec or the HYDRA_RMK environment variable.
shell$ mpiexec -rmk pbs ./app
Finally, if you do not want Hydra to auto-detect the number of processes allocated or the machines allocated, you can customize that using the -n and -f flags.
shell$ mpiexec -rmk pbs -n 4 -f ~/hosts ./app
On supported platforms, Hydra automatically configures available process-core binding capability using hwloc. More info on how to use these options can be found in the help text:
shell$ mpiexec -bind-to -help
Binding options can also be controlled with the environment variables HYDRA_TOPOLIB, HYDRA_BINDING, HYDRA_MAPPING, and HYDRA_MEMBIND.
For the purposes of process binding/mapping examples, we will assume the following machine topology.
Setting the env variable HYDRA_TOPO_DEBUG=1 will force hydra to print out bindings, but not call the binding API. This is useful for testing binding options using hwloc's arbitrary topology loading feature, as is demonstrated below.
To bind processes to single hardware threads:
shell$ HYDRA_TOPO_DEBUG=1 mpiexec -n 8 -bind-to hwthread /bin/true | sort process 0 binding: 1 0 0 0 0 0 0 0 process 1 binding: 0 0 1 0 0 0 0 0 process 2 binding: 0 0 0 0 1 0 0 0 process 3 binding: 0 0 0 0 0 0 1 0 process 4 binding: 0 1 0 0 0 0 0 0 process 5 binding: 0 0 0 1 0 0 0 0 process 6 binding: 0 0 0 0 0 1 0 0 process 7 binding: 0 0 0 0 0 0 0 1
To bind processes to 2 cores at a time:
shell$ HYDRA_TOPO_DEBUG=1 mpiexec -n 8 -bind-to core:2 /bin/true | sort process 0 binding: 1 0 1 0 0 0 0 0 process 1 binding: 0 0 0 0 1 0 1 0 process 2 binding: 0 1 0 1 0 0 0 0 process 3 binding: 0 0 0 0 0 1 0 1 process 4 binding: 1 0 1 0 0 0 0 0 process 5 binding: 0 0 0 0 1 0 1 0 process 6 binding: 0 1 0 1 0 0 0 0 process 7 binding: 0 0 0 0 0 1 0 1
A common use-case is to bind processes to a socket, and map by hwthread to group sequential ranks together.
shell$ HYDRA_TOPO_DEBUG=1 mpiexec -n 8 -bind-to socket -map-by hwthread /bin/true | sort process 0 binding: 1 0 1 0 1 0 1 0 process 1 binding: 1 0 1 0 1 0 1 0 process 2 binding: 1 0 1 0 1 0 1 0 process 3 binding: 1 0 1 0 1 0 1 0 process 4 binding: 0 1 0 1 0 1 0 1 process 5 binding: 0 1 0 1 0 1 0 1 process 6 binding: 0 1 0 1 0 1 0 1 process 7 binding: 0 1 0 1 0 1 0 1
Also included in the MPICH source is a program for printing out the affinity of a process (src/pm/hydra/examples/print_cpus_allowed.c) according to the OS. This can be used on Linux systems to test that bindings are working correctly.
shell$ mpiexec -n 8 -bind-to socket ./print_cpus_allowed | sort crush: Cpus_allowed_list: 0,2,4,6 crush: Cpus_allowed_list: 1,3,5,7 crush: Cpus_allowed_list: 0,2,4,6 crush: Cpus_allowed_list: 1,3,5,7 crush: Cpus_allowed_list: 0,2,4,6 crush: Cpus_allowed_list: 1,3,5,7 crush: Cpus_allowed_list: 0,2,4,6 crush: Cpus_allowed_list: 1,3,5,7
X-forwarding is specific to each bootstrap server. Some servers do it by default, while some don't. For ssh, this is disabled by default. To force-enable it, you should use the option -enable-x to mpiexec.
shell$ mpiexec -enable-x -f hosts -n 4 ./app
Hydra provides checkpoint/restart capability. Currently, only BLCR is supported. To use checkpointing include the -ckpointlib option for mpiexec to specify the checkpointing library to use and -ckpoint-prefix to specify the directory where the checkpoint images should be written:
shell$ mpiexec -ckpointlib blcr -ckpoint-prefix /home/buntinas/ckpts/app.ckpoint -f hosts -n 4 ./app
While the application is running, the user can request for a checkpoint at any time by sending a SIGUSR1 signal to mpiexec.
You can also automatically checkpoint the application at regular intervals using the mpiexec option -ckpoint-interval to specify the number of seconds between checkpoints:
shell$ mpiexec -ckpointlib blcr -ckpoint-prefix /home/buntinas/ckpts/app.ckpoint -ckpoint-interval 3600 -f hosts -n 4 ./app
The checkpoint/restart parameters can be controlled with the environment variables HYDRA_CKPOINTLIB, HYDRA_CKPOINT_PREFIX and HYDRA_CKPOINT_INTERVAL.
Each checkpoint generates one file per node. Note that checkpoints for all processes on a node will be stored in the same file. Each time a new checkpoint is taken an additional set of files are created. The files are numbered by the checkpoint number. This allows the application to be restarted from checkpoints other than the most recent. The checkpoint number can be specified with the -ckpoint-num parameter. To restart a process:
shell$ mpiexec -ckpointlib blcr -ckpoint-prefix /home/buntinas/ckpts/app.ckpoint -ckpoint-num 5 -f hosts -n 4
Note that by default, the process will be restarted from the first checkpoint, so in most cases, the checkpoint number should be specified.
Hydra supports multiple I/O demux engines including poll and select. The default is "poll". You can pick these through the mpiexec option -demux:
shell$ mpiexec -demux select -f hosts -n 4 ./app
This can also be controlled by using the HYDRA_DEMUX environment variable.
Hydra natively supports parallel debuggers such as totalview and DDT.
You can debug the MPI application with totalview by launching it as:
shell$ totalview mpiexec -a -f hosts -n 4 ./app
The "-a" option is a totalview parameter which tells it that the arguments after that need to be passed to mpiexec.
You can debug the MPI application with DDT by launching it as:
shell$ ddt mpiexec -a -f hosts -n 4 ./app
The "-a" option is a DDT parameter which tells it that the arguments after that need to be passed to mpiexec.
For serial debuggers such as 'ddd', you can launch each process with a separate debugger window as:
shell$ mpiexec -f hosts -n 4 ddd ./app
This will spawn four copies of "./app" each one launched under a separate 'ddd' instance.
You can do something similar to 'ddd' for serial debuggers that do not have a graphical interface, such as 'gdb', by launching them over 'xterm':
shell$ mpiexec -f hosts -n 4 xterm -e gdb ./app
If you want only the third process to run in a debugger, and the remaining processes to run normally, you can do:
shell$ mpiexec -f hosts -n 2 ./app : -n 1 xterm -e gdb ./app : -n 1 ./app
Using Hydra on Machines with Different User Names
Hydra only supports using different usernames on some launchers (such as ssh and rsh). For this, the host file should contain a "user=<foo>" entry.
shell$ cat hosts donner user=foo foo user=bar shakey user=bar terra user=foo